4 Tips For Maintaining Your Private Well

If you have a private well on your property that you use to supply your home with water, you need to keep it properly maintained, clean and safe. The water you get from a well is not treated with chemicals in the same way as your city water, so it will be up to you to ensure the well is in good condition and the water is always drinkable. Consider a few important tips for water well maintenance on your private property.

1. Have a water test done at least once per year

Never assume that you can always see, smell or taste sediment in your water when you own a well but instead, have your water tested at least once per year. A water testing lab can check for bacteria buildup and contaminants that may be seeping into your well from the ground around it. In turn you can determine if your well has leaks or if you need to add chemical treatments to your water as it comes into your home.

2. Have your pump inspected every year

Your pump should be inspected every year by an expert; he or she will look for rust buildup, sediment inside the pump, and cracks or leaks. Since the water needs to travel through your pump to get to your home, it's vital that it be in good condition and not have any sediment that may get picked up by the water as it travels. Don't rely on your own inspection but have a professional check the pump inside and out for maximum safety.

3. Slope the ground away from your well

You don't want any drainage into your well so you need to slope the ground away from it at all times. When your well is installed typically the ground will be sloped properly, but it can shift over time. Every year have the slope checked and dig trenches if needed to direct drainage away from your well.

4. Keep the drainage casing clear

Be careful when landscaping or mowing or doing any clearing on your property, so you keep the drainage casing clear. You don't want to nick or cut the casing with your landscaping equipment and don't want leaves, snow, or other debris to pile up around the casing. Check the casing every week to ensure it's clear and note if there are cracks or other damage.

While these tips can ensure that your well and the water it provides are both safe and protected, you also want to ensure you have a professional come out and inspect the well on a regular basis. This can alert you to any leaks inside the well body and any other potential hazards that you should address immediately.